{"title":"Titanium Cranks","description":"\u003cp\u003eALUGEAR Titanium Cranks are CNC-machined crank arms produced from aerospace-grade titanium alloy — offering an exceptional strength-to-weight ratio with the natural corrosion resistance and fatigue life that makes titanium the premium choice for high-mileage road and gravel builds.\u003c\/p\u003e\u003cp\u003eEach arm is precision-machined for tight dimensional tolerances, a precise Q-factor and compatibility with ALUGEAR and standard chainring interfaces, delivering a distinctive, lasting upgrade over conventional aluminum cranks.\u003c\/p\u003e","products":[{"product_id":"spacers-titanium-for-pedals","title":"Spacers titanium for pedals","description":"\u003ch4\u003e\u003cstrong\u003eTECHNICAL SPECIFICATIONS\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntended to:\u003c\/strong\u003e ALUGEAR crank arms less than one gram\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of two washers:\u003c\/strong\u003e 0,9g \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e titanium Ti-6Al-4V \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade:\u003c\/strong\u003e CNC turning \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors:\u003c\/strong\u003e titanium  \u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003e\u003cstrong\u003eCOMPATIBILITY\u003c\/strong\u003e\u003c\/h4\u003e\nCompatible with ALUGEAR Stellar Crank Arms \n\u003ch4\u003e\u003cstrong\u003eINFORMATION\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cspan\u003e\u003cspan\u003eALUGEAR Washers to protect crank arms when mounting the pedals\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003eWe recommend using these spacers to prevent damage to the cranks during installation. They help avoid signs of wear in the heavy daily life of the cranks. We offer a variety of spare parts to eliminate the need for replacing the entire component. This approach is both eco-friendly and customer-focused\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eQuality Manufacturing - proudly made in Poland!\u003c\/span\u003e\u003c\/span\u003e\n\n\u003ch4\u003e\u003cstrong\u003eRECOMMENDATIONS\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cspan\u003e\u003cspan\u003eThe recommended torque for the pedal shaft is 35-40 Nm unless otherwise specified by the pedal manufacturer\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eUse a torque wrench for precise tightening\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003ePlease handle the removal and installation tool carefully to avoid damaging any parts of the Crankset \u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eThe ALUGEAR Stellar cranksets are produced from durable materials, giving them exceptional longevity. However, when handling the cranksets, it is crucial to be extremely careful during operation and maintenance, using only those tools that are specifically designed for installation and service tasks\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e \u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003ePlease note that this is a replacement part\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003eALUGEAR Cranks are supplied with these Pedal Washers \u003c\/span\u003e\u003cspan\u003e   \u003c\/span\u003e\n\u003cspan\u003e \u003c\/span\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003ca href=\"https:\/\/alugear.com\/img\/cms\/Cranks%20chart.jpg\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan\u003ePedal Washers chart for ALUGEAR Cranks\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cspan\u003e \u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eIncludes: 2 pcs titanium washers\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e \u003c\/span\u003e","brand":"alugear","offers":[{"title":"Silver","offer_id":52797593059666,"sku":"5908374281184","price":6.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/2605\/1666\/files\/image-31.jpg?v=1772016852"},{"product_id":"preload-adjuster-ring","title":"Preload Adjuster Ring","description":"\u003ch4\u003e\u003cstrong\u003eTECHNICAL SPECIFICATIONS\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntended to use:\u003c\/strong\u003e for ALUGEAR crank arms \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of ring with bolt:\u003c\/strong\u003e 5g \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Spindel diameter:\u003c\/strong\u003e 28,99 mm; DUB \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial ring:\u003c\/strong\u003e aerospace aluminum 7075-T6\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial bolt:\u003c\/strong\u003e titanium \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade:\u003c\/strong\u003e CNC turning and milling \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface coating:\u003c\/strong\u003e anodizing\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors:\u003c\/strong\u003e only black  \u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003e\u003cstrong\u003eCOMPATIBILITY\u003c\/strong\u003e\u003c\/h4\u003e\nBottom bracket preload adjuster ring for ALUGEAR cranks\n\n\u003ch4\u003e\u003cstrong\u003eINFORMATION\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cspan\u003e\u003cspan\u003eALUGEAR Stellar cranks are meticulously CNC machined and can be anodized in eight vibrant colors, adding a striking visual flair to your bike while delivering impressive technical performance.\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eIn recent years, the approach to selecting crank length for mountain bikes (MTB) has undergone significant changes. Following modern trends in the bike industry, the company ALUGEAR has designed Stellar cranks for MTB, specifically focusing on shorter crank arms. These are designed for use in disciplines that require enhanced control, maneuverability, and stability on challenging terrain.\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003e\u003cspan\u003eThis high-performance crankset is tailored to deliver unparalleled reliability and efficiency across these demanding environments, ensuring that riders can confidently push their limits.  \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eQuality Manufacturing - proudly made in Poland!\u003c\/span\u003e\u003c\/span\u003e\n\n\u003ch4\u003e\u003cstrong\u003eRECOMMENDATIONS\u003c\/strong\u003e\u003c\/h4\u003e\nThe tool for Crank Bolts: 8 mm hexagon socket permissible torque: is 55 Nm\nMaximum permitted weight of rider + bicycle: is 130 kg Use a torque wrench for precise tightening\n\u003cspan\u003e\u003cspan\u003e\u003cspan\u003ePlease handle the removal and installation tool carefully to avoid damaging any parts of the Crankset\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eWhen installing and removing the Сranks, please note that:\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eFixing Crank Bolt has left-threaded on the non-drive side;\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eFixing Crank Bolt has right-threaded on the drive side.\u003c\/span\u003e\u003c\/span\u003e\nFor removing the crank arm is used self-extracting hardware.\nWe carefully designed our cranks and threaded the Crank Bolts and Integrated Pullers so that they would minimize the possibility of the Crank Arms coming loose.\nThe ALUGEAR Stellar cranksets are produced from durable materials, giving them exceptional longevity. Keep this in mind during assembly, maintenance, or operation of the component. Due to the material's resilience, most minor damages will not harm the cranksets. However, when handling the cranksets, it is crucial to be extremely careful during operation and maintenance, using only those tools that are specifically designed for installation and service tasks\n\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003eComponent Compatibility:\u003c\/strong\u003e Ensure that all components are compatible with each other and fit your bicycle\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eBy following these guidelines, you can set up a crankset system that perfectly matches your frame and delivers maximum performance:\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003ca href=\"https:\/\/alugear.com\/img\/cms\/Chainline.jpg\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan\u003eChoosing components to the correct Chainline\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003ca href=\"https:\/\/alugear.com\/img\/cms\/Spacers%20chart%20for%20MTB%20DUB%20PRESSFIT%20Bottom%20Bracket.jpg\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan\u003eSpacers chart for MTB DUB PRESSFIT Bottom Bracket\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003ca href=\"https:\/\/alugear.com\/img\/cms\/Spacers%20chart%20for%20MTB%20DUB%20BSA%20Bottom%20Bracket.jpg\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan\u003eSpacers chart for MTB DUB BSA Bottom Bracket \u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003ca href=\"https:\/\/alugear.com\/img\/cms\/Spacers%20chart%20for%20MTB%20DUB%20BSA%20Bottom%20Bracket%20(with%20Chain%20Guide).jpg\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan\u003eSpacers chart for MTB DUB BSA Bottom Bracket (with Chain Guide)\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cspan\u003e \u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eIncludes: 1pcs preload adjuster ring with titanium bolt\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e \u003c\/span\u003e","brand":"alugear","offers":[{"title":"Black","offer_id":52797593682258,"sku":"5908374286325","price":43.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/2605\/1666\/files\/image-1_4e48b9b3-1aa2-4513-bb4a-c3c7d5cad3b3.jpg?v=1772017061"},{"product_id":"titanium-crankset-stellar-ti-mtb","title":"Titanium Crankset Stellar Ti MTB","description":"\u003cstrong\u003eThe original \u003c\/strong\u003e\u003cstrong\u003edesign \u003c\/strong\u003e\u003cstrong\u003eALUGEAR Cranks \"STELLAR Ti \"\u003c\/strong\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003ch4\u003e\u003cstrong\u003eTECHNICAL SPECIFICATIONS\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntended to use:\u003c\/strong\u003e XC, Down-Country, All-Mountain, Enduro, DownHill\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrank Arm length:\u003c\/strong\u003e 155mm; 160mm; 165mm; 170mm\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable Spindle configurations:\u003c\/strong\u003e standard, wide, superboost, DH\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle diameter:\u003c\/strong\u003e 28,99 mm; DUB \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ factor:\u003c\/strong\u003e 168mm (standard spindle); 174mm (wide spindle); 177mm (superboost spindle); 183mm (DH spindle)\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 437g (155mm crank arms); 443g (160mm); 449g (165mm); 455g (170mm) with \u003cstrong\u003estandard\u003c\/strong\u003e spindle\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChainline:\u003c\/strong\u003e Cranks with the \u003cstrong\u003estandard\u003c\/strong\u003e spindle 52mm (when using chainring with 3 mm offset), 55mm (when using chainring with 0 mm offset); Cranks with the \u003cstrong\u003ewide\u003c\/strong\u003e spindle 55mm (when using chainring with 3 mm offset); Cranks with the \u003cstrong\u003esuperboost\u003c\/strong\u003e spindle 56,5mm (when using chainring with 3 mm offset);\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChainring interface:\u003c\/strong\u003e 8-bolt Direct Mount \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility Bottom Bracket:\u003c\/strong\u003e DUB MTB (PressFit, BSA) \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility PM:\u003c\/strong\u003e Quarq Power Meter spider and others with 8-hole mount \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial crank arms:\u003c\/strong\u003e titanium Ti-6Al-4V\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial spindle:\u003c\/strong\u003e \u003cspan\u003eaerospace aluminum 7075-T6 \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial spacers and chainring bolts:\u003c\/strong\u003e titanium Ti-6Al-4V (2pсs. spindle spacers, 2pcs. pedal spacers, 8pcs. bolts for chainring mount, 1pcs. preload ring's bolt) \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade:\u003c\/strong\u003e 3D printing, CNC turning and milling\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface coating:\u003c\/strong\u003e anodizing\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e raw titanium\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e  6 years* (crash replacement**) \u003cspan\u003e\u003cspan\u003e\u003ca href=\"https:\/\/alugear.com\/img\/cms\/WARRANTY%20RESOLUTION.jpg\" rel=\"noreferrer noopener\" target=\"_blank\"\u003efollow the Warranty information at the link\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003e\u003cstrong\u003eCOMPATIBILITY\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003eThe ALUGEAR Crankset is compatible with 8 bolts Direct Mount Chainring interface\u003c\/span\u003e\u003c\/span\u003e\nCompatible with PowerMeter Spider with 8-bolts mount (Quarq Spider AXS DUB, Sigeyi, Magene, Ronde, Xcadey etc.)\nCompatible with O-chain with 8-bolts interface\n\u003cspan\u003e\u003cspan\u003eThe ALUGEAR Stellar Ti crankset is meticulously engineered for enthusiasts and professionals who ride a variety of terrains: C\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003eross-Country, D\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003eown-Country, \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003eAll-Mountain, \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003eEnduro, \u003c\/span\u003e\u003c\/span\u003eDownHill\nThe correct choice of crankset model (spindle length) and chainrings (chainring offset) will allow you to select the exact crankset system that matches your frame. This ensures optimal compatibility and performance, guaranteeing the reliable and efficient operation of your bicycle\n\n\u003ch4\u003e\u003cstrong\u003eINFORMATION\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cspan\u003e\u003cspan\u003eALUGEAR STELLAR Ti Crankset is a game changer when it comes to titanium crankset design for use on MTB. Manufactured with cutting-edge 3D printing with hollow body construction and finished using precise CNC machining, it has the ideal blend of strength, rigidity, and light-weight efficiency\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eThe CNC process not only hardens the titanium but also creates a distinctive ALUGEAR design signature - sharp, bold lines that make the crankset instantly recognizable on any bike\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eLengths of arms and spindles: various options for MTB standards\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eRiding styles: Enduro, XC, trail, slopestyle, DH\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eEngineered for riders who demand uncompromising performance, the STELLAR Ti delivers maximum power transfer, extreme durability, and a tailored fit. Built for those who push limits - whether elite racers or ambitious enthusiasts\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eQuality Manufacturing - proudly made in Poland and Germany!\u003c\/span\u003e\u003c\/span\u003e\n\n\u003ch4\u003e\u003cstrong\u003eRECOMMENDATIONS\u003c\/strong\u003e\u003c\/h4\u003e\nThe tool for Crank Bolts: 8 mm hexagon socket permissible torque: is 55 Nm \n\u003cspan\u003e\u003cspan\u003eCranks compatibility with the chainring direct mount 8-bolts, tool holder Torx T20, maximum permissible torque: 4 Nm\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eThe tool for the Preload Ring’s Bolt: 2,5 mm hexagon socket, torque: 2 Nm\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eThe tool for Integrated Pullers is a cassette lockring tool, the recommended permissible torque: 20 Nm\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eThe recommended torque for the pedal shaft is 35-40 Nm unless otherwise specified by the pedal manufacturer\u003c\/span\u003e\u003c\/span\u003e\nUse a torque wrench for precise tightening\n\u003cspan\u003e\u003cspan\u003e\u003cspan\u003ePlease handle the removal and installation tool carefully to avoid damaging any parts of the Crankset\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eWhen installing and removing the Сranks, please note that:\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eFixing Crank Bolt has left-threaded on the non-drive side\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eFixing Crank Bolt has right-threaded on the drive side\u003c\/span\u003e\u003c\/span\u003e\nFor removing the crank arm is used self-extracting hardware\nWe carefully designed our cranks and threaded the Crank Bolts and Integrated Pullers so that they would minimize the possibility of the Crank Arms coming loose\nThe ALUGEAR Stellar Ti cranksets are produced from durable materials, giving them exceptional longevity. Keep this in mind during assembly, maintenance, or operation of the component. Due to the material's resilience, most minor damage will not harm the cranksets. However, when handling the cranksets, it is crucial to be extremely careful during operation and maintenance, using only those tools that are specifically designed for installation and service tasks\n\n\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003eComponent Compatibility:\u003c\/strong\u003e ensure that all components are compatible with each other and fit your bicycle\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eBy following these guidelines, you can set up a crankset system that perfectly matches your frame and delivers maximum performance:\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003e\u003ca href=\"https:\/\/alugear.com\/img\/cms\/Chainline.jpg\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan\u003eChoosing components to the correct Chainline\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003e\u003ca href=\"https:\/\/alugear.com\/img\/cms\/%D0%A1hart%20PRESSFIT%20BB%20MTB%20DUB.pdf\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan\u003eSpacers chart for MTB DUB PRESSFIT Bottom Bracket\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003e\u003ca href=\"https:\/\/alugear.com\/img\/cms\/%D0%A1hart%20BSA%20BB%20MTB%20DUB.pdf\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan\u003eSpacers chart for MTB DUB BSA Bottom Bracket \u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003e\u003ca href=\"https:\/\/alugear.com\/img\/cms\/Spacers%20chart%20for%20MTB%20DUB%20BSA%20Bottom%20Bracket%20(with%20Chain%20Guide).jpg\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan\u003eSpacers chart for MTB DUB BSA Bottom Bracket (with Chain Guide)\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eCrank Spacers needed for properly installing the cranks are included with a Bottom Bracket. The Spacer set depends on the model of the Bottom Bracket\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eCrank Spacers are not included with ALUGEAR cranks. (Since we don't know which spacers you will need)\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e \u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eIncludes: 2pcs crank arms with preload ring; 1pc spindle; 8pcs titanium bolts for chainring mounting; 2pcs titanium pedal washers\u003c\/span\u003e\u003c\/span\u003e","brand":"alugear","offers":[{"title":"155 \/ DH","offer_id":52808317763922,"sku":"5908374289821","price":1328.0,"currency_code":"EUR","in_stock":true},{"title":"155 \/ standard","offer_id":52808318910802,"sku":"5908374289708","price":1328.0,"currency_code":"EUR","in_stock":true},{"title":"160 \/ standard","offer_id":52808318943570,"sku":"5908374289715","price":1328.0,"currency_code":"EUR","in_stock":true},{"title":"165 \/ standard","offer_id":52808318976338,"sku":"5908374289722","price":1328.0,"currency_code":"EUR","in_stock":true},{"title":"170 \/ standard","offer_id":52808319009106,"sku":"5908374289739","price":1328.0,"currency_code":"EUR","in_stock":true},{"title":"155 \/ wide","offer_id":52808319041874,"sku":"5908374289746","price":1328.0,"currency_code":"EUR","in_stock":true},{"title":"160 \/ wide","offer_id":52808319074642,"sku":"5908374289753","price":1328.0,"currency_code":"EUR","in_stock":true},{"title":"165 \/ wide","offer_id":52808319107410,"sku":"5908374289760","price":1328.0,"currency_code":"EUR","in_stock":true},{"title":"170 \/ wide","offer_id":52808319140178,"sku":"5908374289777","price":1328.0,"currency_code":"EUR","in_stock":true},{"title":"155 \/ superboost","offer_id":52808319172946,"sku":"5908374289784","price":1328.0,"currency_code":"EUR","in_stock":true},{"title":"160 \/ superboost","offer_id":52808319205714,"sku":"5908374289791","price":1328.0,"currency_code":"EUR","in_stock":true},{"title":"165 \/ superboost","offer_id":52808319238482,"sku":"5908374289807","price":1328.0,"currency_code":"EUR","in_stock":true},{"title":"170 \/ superboost","offer_id":52808319271250,"sku":"5908374289814","price":1328.0,"currency_code":"EUR","in_stock":true},{"title":"160 \/ DH","offer_id":52808319304018,"sku":"5908374289838","price":1328.0,"currency_code":"EUR","in_stock":true},{"title":"165 \/ DH","offer_id":52808319336786,"sku":"5908374289845","price":1328.0,"currency_code":"EUR","in_stock":true},{"title":"170 \/ DH","offer_id":52808319369554,"sku":"5908374289852","price":1328.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/2605\/1666\/files\/image-1_e27ba877-176b-4da8-a6dd-c60d2190e3b1.jpg?v=1772108281"},{"product_id":"titanium-crank-arms-stellar-ti-mtb","title":"Titanium Crank Arms Stellar Ti MTB","description":"\u003cstrong\u003eThe original \u003c\/strong\u003e\u003cstrong\u003edesign \u003c\/strong\u003e\u003cstrong\u003eALUGEAR Crank Arms \"Stellar Ti\"\u003c\/strong\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003cspan\u003eThe set includes two Crank Arms without a Spindle\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003cspan\u003e \u003c\/span\u003e\n\u003ch4\u003e\u003cstrong\u003eTECHNICAL SPECIFICATIONS\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntended to use:\u003c\/strong\u003e XC, Down-Country, All-Mountain, Enduro, DownHill \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrank arm length:\u003c\/strong\u003e 155mm; 160mm; 165mm; 170mm \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight of two Arms: \u003c\/strong\u003e without spindle 339g (155mm); 345g (160mm); 351g (165mm); 357g (170mm)\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ factor:\u003c\/strong\u003e depending on which spindle you choose \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChainring interface:\u003c\/strong\u003e 8-bolt Direct Mount \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Crankset:\u003c\/strong\u003e  titanium Ti-6Al-4V \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial spacers and chainring bolts:\u003c\/strong\u003e titanium Ti-6Al-4V (2pсs. spindle spacers, 2pcs. pedal spacers, 8pcs. bolts for chainring mount, 1pcs. preload ring's bolt) \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade:\u003c\/strong\u003e 3D printing, CNC turning and milling\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors:\u003c\/strong\u003e raw titanium \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e  6 years* (crash replacement**) \u003cspan\u003e\u003cspan\u003e\u003ca href=\"https:\/\/alugear.com\/img\/cms\/WARRANTY%20RESOLUTION.jpg\" rel=\"noreferrer noopener\" target=\"_blank\"\u003efollow the Warranty information at the link\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003e\u003cstrong\u003eCOMPATIBILITY\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003eThe ALUGEAR Crankset is compatible with 8 bolts Direct Mount Chainring interface\u003c\/span\u003e\nCompatible with PowerMeter Spider with 8-bolts mount (Quarq Spider AXS DUB, Sigeyi, Magene, Ronde, Xcadey etc.)\nCompatible with O-chain with 8-bolts interface\n\u003cspan\u003eThe ALUGEAR Stellar Ti crankset is meticulously engineered for enthusiasts and professionals who ride a variety of terrains: C\u003c\/span\u003e\u003cspan\u003eross-Country, D\u003c\/span\u003e\u003cspan\u003eown-Country, \u003c\/span\u003e\u003cspan\u003eAll-Mountain, \u003c\/span\u003e\u003cspan\u003eEnduro, \u003c\/span\u003eDownHill\nThe correct choice of crankset model (spindle length) and chainrings (chainring offset) will allow you to select the exact crankset system that matches your frame. This ensures optimal compatibility and performance, guaranteeing the reliable and efficient operation of your bicycle\n\n\u003ch4\u003e\u003cstrong\u003eINFORMATION\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cspan\u003eALUGEAR STELLAR Ti Crankset is a game changer when it comes to titanium crankset design for use on MTB. Manufactured with cutting-edge 3D printing with hollow body construction and finished using precise CNC machining, it has the ideal blend of strength, rigidity, and light-weight efficiency\u003c\/span\u003e\n\u003cspan\u003eThe CNC process not only hardens the titanium but also creates a distinctive ALUGEAR design signature - sharp, bold lines that make the crankset instantly recognizable on any bike\u003c\/span\u003e\n\u003cspan\u003eLengths of arms and spindles: various options for MTB standards\u003c\/span\u003e\n\u003cspan\u003eRiding styles: Enduro, XC, trail, slopestyle, DH\u003c\/span\u003e\n\u003cspan\u003eEngineered for riders who demand uncompromising performance, the STELLAR Ti delivers maximum power transfer, extreme durability, and a tailored fit. Built for those who push limits - whether elite racers or ambitious enthusiasts\u003c\/span\u003e\n\u003cspan\u003eQuality Manufacturing - proudly made in Poland and Germany!\u003c\/span\u003e\n\n\u003ch4\u003e\u003cstrong\u003eRECOMMENDATIONS\u003c\/strong\u003e\u003c\/h4\u003e\nThe tool for Crank Bolts: 8 mm hexagon socket permissible torque: is 55 Nm \n\u003cspan\u003eCranks compatibility with the chainring direct mount 8-bolts, tool holder Torx T20, maximum permissible torque: 4 Nm\u003c\/span\u003e\n\u003cspan\u003eThe tool for the Preload Ring’s Bolt: 2,5 mm hexagon socket, torque: 2 Nm\u003c\/span\u003e\n\u003cspan\u003eThe tool for Integrated Pullers is a cassette lockring tool, the recommended permissible torque: 20 Nm\u003c\/span\u003e\n\u003cspan\u003eThe recommended torque for the pedal shaft is 35-40 Nm unless otherwise specified by the pedal manufacturer\u003c\/span\u003e\nUse a torque wrench for precise tightening\n\u003cspan\u003e\u003cspan\u003e\u003cspan\u003ePlease handle the removal and installation tool carefully to avoid damaging any parts of the Crankset\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003eWhen installing and removing the Сranks, please note that:\u003c\/span\u003e\n\u003cspan\u003eFixing Crank Bolt has left-threaded on the non-drive side\u003c\/span\u003e\n\u003cspan\u003eFixing Crank Bolt has right-threaded on the drive side\u003c\/span\u003e\nFor removing the crank arm is used self-extracting hardware\nWe carefully designed our cranks and threaded the Crank Bolts and Integrated Pullers so that they would minimize the possibility of the Crank Arms coming loose\nThe ALUGEAR Stellar Ti cranksets are produced from durable materials, giving them exceptional longevity. Keep this in mind during assembly, maintenance, or operation of the component. Due to the material's resilience, most minor damage will not harm the cranksets. However, when handling the cranksets, it is crucial to be extremely careful during operation and maintenance, using only those tools that are specifically designed for installation and service tasks\n\n\u003cspan\u003e\u003cspan\u003eIncludes: 2pcs crank arms with preload ring; 8pcs titanium bolts for chainring mounting; 2pcs titanium pedal washers\u003c\/span\u003e\u003c\/span\u003e","brand":"alugear","offers":[{"title":"155","offer_id":52808332640594,"sku":"5908374289869","price":1222.0,"currency_code":"EUR","in_stock":true},{"title":"160","offer_id":52808332673362,"sku":"5908374289876","price":1222.0,"currency_code":"EUR","in_stock":true},{"title":"165","offer_id":52808332706130,"sku":"5908374289883","price":1222.0,"currency_code":"EUR","in_stock":true},{"title":"170","offer_id":52808332738898,"sku":"5908374289890","price":1222.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/2605\/1666\/files\/image-1_2526baf4-d0eb-4beb-9ebf-b000aea35d1b.jpg?v=1772108314"},{"product_id":"spindle-dub-mtb-for-titanium-cranks","title":"Spindle DUB MTB for Titanium Cranks","description":"\u003ch4\u003e\u003cstrong\u003eTECHNICAL SPECIFICATIONS\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntended to use:\u003c\/strong\u003e XC, Down-Country, All-Mountain, Enduro, DownHill\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindle Weight:\u003c\/strong\u003e standard 98g; wide 103g; superboost 104g; DH 122g \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ factor:\u003c\/strong\u003e standard 168mm; wide 174mm; superboost 177mm; DH 183mm\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpindel diameter:\u003c\/strong\u003e 28,99 mm; DUB \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility Bottom Bracket:\u003c\/strong\u003e DUB MTB (PressFit, BSA) \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e aerospace aluminum 7075-T6 \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade:\u003c\/strong\u003e CNC turning\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface coating:\u003c\/strong\u003e anodizing\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors:\u003c\/strong\u003e black \n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e  6 years* (crash replacement**) \u003cspan\u003e\u003cspan\u003e\u003ca href=\"https:\/\/alugear.com\/img\/cms\/WARRANTY%20RESOLUTION.jpg\" rel=\"noreferrer noopener\" target=\"_blank\"\u003efollow the Warranty information at the link\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003e\u003cstrong\u003eCOMPATIBILITY\u003c\/strong\u003e\u003c\/h4\u003e\nCompatible with ALUGEAR Stellar Ti MTB Crank Arm length: 155mm; 160mm; 165mm; 170mm\nThe correct choice of spindle length and chainrings (chainring offset) will allow you to select the exact crankset system that matches your frame. This ensures optimal compatibility and performance, guaranteeing the reliable and efficient operation of your bicycle.\n\n\u003ch4\u003e\u003cstrong\u003eINFORMATION\u003c\/strong\u003e\u003c\/h4\u003e\nALUGEAR STELLAR Ti Crankset is a game changer when it comes to titanium crankset design for use on MTB. Manufactured with cutting-edge 3D printing with hollow body construction and finished using precise CNC machining, it has the ideal blend of strength, rigidity, and light-weight efficiency\nThe CNC process not only hardens the titanium but also creates a distinctive ALUGEAR design signature - sharp, bold lines that make the crankset instantly recognizable on any bike\nLengths of arms and spindles: various options for MTB standards\nRiding styles: Enduro, XC, trail, slopestyle, DH\nEngineered for riders who demand uncompromising performance, the STELLAR Ti delivers maximum power transfer, extreme durability, and a tailored fit. Built for those who push limits - whether elite racers or ambitious enthusiasts\nQuality Manufacturing - proudly made in Poland!\n\n\u003ch4\u003e\u003cstrong\u003eRECOMMENDATIONS\u003c\/strong\u003e\u003c\/h4\u003e\nThe tool for Crank Bolts: 8 mm hexagon socket permissible torque: is 55 Nm\nMaximum permitted weight of rider + bicycle: is 130 kg Use a torque wrench for precise tightening\n\u003cspan\u003e\u003cspan\u003e\u003cspan\u003ePlease handle the removal and installation tool carefully to avoid damaging any parts of the Crankset\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eWhen installing and removing the Сranks, please note that:\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eFixing Crank Bolt has left-threaded on the non-drive side;\u003c\/span\u003e\u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eFixing Crank Bolt has right-threaded on the drive side.\u003c\/span\u003e\u003c\/span\u003e\nFor removing the crank arm is used self-extracting hardware.\nWe carefully designed our cranks and threaded the Crank Bolts and Integrated Pullers so that they would minimize the possibility of the Crank Arms coming loose.\n\u003cspan\u003e \u003c\/span\u003e\n\u003cspan\u003e\u003cspan\u003eIncludes: 1pcs. spindle\u003c\/span\u003e\u003c\/span\u003e","brand":"alugear","offers":[{"title":"DH","offer_id":52808338702674,"sku":"5908374292234","price":106.0,"currency_code":"EUR","in_stock":true},{"title":"wide","offer_id":52808339358034,"sku":"5908374292210","price":106.0,"currency_code":"EUR","in_stock":true},{"title":"superboost","offer_id":52808339390802,"sku":"5908374292227","price":106.0,"currency_code":"EUR","in_stock":true},{"title":"standard","offer_id":52808339423570,"sku":"5908374292203","price":106.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/2605\/1666\/files\/image-1_a220121a-e267-41bb-b387-c50e16fe8ec0.jpg?v=1772108332"},{"product_id":"ti-screw-set-m4x8-for-8-bolts-direct-mount-chainrings","title":"Ti Screw Set M4x8 for 8-bolts Direct Mount Chainrings","description":"\u003ch4\u003e\u003cstrong\u003eTECHNICAL SPECIFICATIONS\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch4\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M4 \u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch4\u003e\n\u003cstrong\u003eThread length:\u003c\/strong\u003e 8 mm \u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch4\u003e\n\u003cstrong\u003eTotal length:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e11 mm \u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch4\u003e\n\u003cstrong\u003eHead shape:\u003c\/strong\u003e cylindrical\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch4\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Titanium\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch4\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e titanium\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch4\u003e\n\u003cstrong\u003eTool holder:\u003c\/strong\u003e Torx 20\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch4\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4g (8pcs)\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCOMPATIBILITY\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch4\u003eFor 8-bolts direct mount chainrings and cranks with DUB, BB30 and GXP bottom bracket spindle interface that have corresponding 8 point screw connection\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eINFORMATION\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4\u003eFastening screws for direct mount chainrings on 8-bolts cranks (8 screws)\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eRECOMMENDATIONS\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch4\u003eMaximum torque: 4 Nm\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eDelivery includes: 1 x titanium screws set M4x8 (8 screws) \u003c\/h4\u003e","brand":"alugear","offers":[{"title":"Raw","offer_id":53412685447506,"sku":"5908374275978","price":29.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1053\/2605\/1666\/files\/8boltstitanium.jpg?v=1778598752"}],"url":"https:\/\/alugear.com\/en-in\/collections\/titanium-cranks.oembed","provider":"alugear","version":"1.0","type":"link"}