Round SuperBoost for SRAM 8-bolts MTB

Chainring 1-speed direct mount narrow-wide Round for SRAM 8-bolts MTB SuperBoost ELM 0 mm offset

$66.00
Size: 26T
Color: Green
Quantity

100% secure payments
  Processing

Processing time: up to 10 business days

  Delivery

Shipping time: 2 to 7 business days. Provided by FedEx

  Return Policy

You can return an unused product within 30 days

The original design ALUGEAR chainring “ELM”

 

TECHNICAL SPECIFICATIONS

  • Offset: 26T-42T  0,0mm

  • Weight: 26T- 46g; 28T- 51g; 30T- 56g; 32T- 62g; 34T- 69g; 36T- 74g; 38T- 79g; 40T- 85g; 42T- 89g

  • Diameter: 26T- 115mm; 28T- 124mm; 30T- 131,5mm; 32T- 138,6mm; 34T- 148mm; 36T- 154,2mm; 38T- 161,3mm; 40T- 171,0mm; 42T- 179,0mm

  • Material: 7075-T6 aluminum

  • Made: CNC milling

  • Surface coating: Anodizing

 

COMPATIBILITY

  • For cranks MTB SRAM 8 bolts Direct Mount, BB spindle interface: DUB

  • Optimal use with rear hubs 148mm (O.L.D.) and chain line 55mm. More of the big frame manufacturers are moving their Boost (148mm x 12mm) spacing mountain bikes from the 52mm chainline to a 55mm chainline, like the Scott Spark

  • MTB chainrings you may use the following chains: all 10sp, 11sp, 12sp SRAM Eagle and 10sp, 11sp, 12sp Shimano chains

 

INFORMATION

ALUGEAR is specialized in the production of high-quality bicycle components. We are one of the first who starts to produce 8-bolts MTB chainrings

Most have used a 3-bolts design for direct mount chainrings. But now the 8-bolts standard has come to be used for DUB MTB cranks and Power Meters more

We offer Оval and Round chainrings for 8-bolts cranks with a large range tooth count of 26T-42T, and 8 color options

ALUGEAR chainrings are some of the lightest chainrings on the market. Using our experience and vigorous testing, we tweaked the arm design and strategically machined the chainrings so that only minimal sacrifices were made in impact strength in exchange for large gains in weight reduction

The chainrings are CNC machined from 7075 T6 aluminum and hard coat industrially anodized to provide protection from mechanical impacts, a good look, and an excellent tactile feel to each of the chainrings that lasts a long time
A unique tooth profile eliminates chain noise, reduces wear, and provides smooth operation on the entire system of all the most common combinations, such as 10, 11, and 12-speed drives. The Narrow Wide teeth guide the chain reliably

The tooth profile is specially designed for use with MTB chains

ALUGEAR chainrings are the best choice if you are looking for a technologically sound chainring with a unique design and low weight

 

RECOMMENDATIONS

  • Use the screw set M4x8mm to mount on the crank

  • We recommend the use of a clutch system rear derailleur for the best chain security

  • It is also a good idea to use a new chain with your new ALUGEAR chainring

  • It is recommended to use a well-lubricated chain on every ride

 

INSTALLATION INSTRUCTIONS

 

OPTIONS OF DIRECT MOUNT CRANKS

Most MTB cranksets have traditionally used a 3-bolts mounting, but the 8-bolts mounting has been used on the Quarq Power Meter cranks. Now some non-power meter SRAM MTB cranks use the 8-bolts mounting

 

CHAIN LINE

Chainline is measured from the axis of the centerline of the frame to the center of the tooth of the chainring

A correct chain line is when the middle of the front chainring and the middle of the cassette should be at the same distance from the axis that goes along the middle of the bicycle frame from the front to the back. That means the chain will run completely straight. However, sometimes we have to reduce the offset of large (> 36T) chainrings for MTB so that it fits into the frame and do not touch the chainstay

The hub spacing is measured from the outside faces of the end caps, where they come into contact with the frame's dropouts. The spacing dimension is commonly referred to as the "O.L.D." (Over-Lock-nut Distance)

Now the frame manufacturers produce Boost (148mm O.L.D.) spacing mountain bikes with a 55mm chain line (like the Scott Spark)

 

OFFSET

Offset is the distance from the chainring mounting surface to the outer edge of the wide tooth on the chainring. Variants of MTB chainrings Alugear

ALUGEAR
5908374254638

Data sheet

Shape
Round
Compatibility
Cranks SRAM 8-bolts Direct Mount axle type
Offset
0 mm
Design
ELM
Type
MTB
Direct Mount
for SRAM 8-bolts
Version
SuperBoost

Specific References

mpn
5908374254638

You might also like

  • Register

New account register

Already have an account?
Log in instead Or Reset password