TECHNICAL SPECIFICATIONS

• Diameter: 38T- 170mm; 40T- 178mm; 42T- 186mm; 44T- 194mm; 46T- 202mm; 48T- 210mm; 50T- 218mm

• Timing: 108° (top dead center)

• Ovality: 12%

• Technology: Narrow Wide

• Material: Aluminum 7075-T6

• Surface coating: Anodizing

COMPATIBILITY

• For SRAM Apex 1 cranks with 110mm asymmetrical bolt circle diameter (4 holes)

• Chainrings you may use the following chains: all 10sp, 11sp, 12sp Shimano; 10sp, 11sp, 12sp SRAM; Campagnolo; KMC chains

INFORMATION

ALUGEAR chainrings are some of the lightest chainrings on the market. Using our experience and vigorous testing, we tweaked the arm design and strategically machined the chainrings so that only minimal sacrifices were made in impact strength in exchange for large gains in weight reduction

The chainrings are CNC machined from 7075 T6 aluminum and hard coat industrially anodized to provide protection from mechanical impacts, a good look, and an excellent tactile feel to each of the chainrings that lasts a long time.
A unique tooth profile eliminates chain noise, reduces wear, and provides smooth operation on the entire system of all the most common combinations, such as 10, 11, and 12-speed drives

The tooth profile is specially designed for use with Road and MTB chains

ALUGEAR chainrings are the best choice if you are looking for a technologically sound chainring with a unique design and low weight

RECOMMENDATIONS

• Use chainring bolts and nuts for mounting:  6,5mm bolts are required.

• We recommend the use of a clutch system rear derailleur for the best chain security

• It is also a good idea to use a new chain with your new ALUGEAR chainring

INSTALLATION INSTRUCTIONS

• The chainring installation scheme